Home Page | Contact Us | About Us | Your Account | Basket Contents | Terms & Conditions | CHECKOUT | FREE SHIPPING On orders over $400.00
1936 Ford Install Step 1: Line up bottom notch of mounting ring with bottom notch of bracket. Dimple signifies center. Step 2: Tape mounting ring into place. Step 3: With a fine tip permanent marker, mark posistion for holes to be drilled. Step 4: Remove mounting ring to reveal ink marks. Step 5: Line up center drill bit with pen mark. Step 6: With a center drill bit, make dimple. Step 7: Now we are ready to drill. Step 8: Drill holes. Step 9: Debur drilled holes. Step 10: Step 11: Bolt, flat washer, internal tooth washer, flat washer, nut. Step 12: Send bolt and flat washer through ring and housing to internal tooth washer, flat washer and nut on other side. Step 13: Insert clock ring. Line up center dimples. Step 14: Insert headlamp lining up notches on back of lamp to those in clock ring. Step 15: Line up notch on retaining ring with bottom notch of other two rings. Step 16: Bolt, internal tooth washer, flat washer, spacer. Step 17: Send bolt, internal tooth washer, flat washer through retaining ring, spacer and into threaded mounting ring. Step 18: Tighten down. Step 19: Line up bottom notch of beauty ring Step 20: Step 21: Step 22: Step 23: Step 24: