FREE SHIPPING On orders over $400.00
Connecting your 8-9030RS-1 Radio Static Filter
See all 8 steps below
1: You will need a pair of pliers
2: Install Radio Static wire in (non-through) tap splice. Repeat for ground wire.
3: Install Bulb wire in (Through/Open Side) tap splice. Repeat for ground.
4: Lock tap splice with pliers. Repeat for ground
5: Pinch tap splice with finger and thumb.
6: That's it for the bulb wires (hi-beam).
7: Repeat for the bulb wires (low-beam).
8: Repeat for ground wires.