Terms & Conditions
FREE SHIPPING On orders over $400.00
1936 Ford Install
Step 1: Line up bottom notch of mounting ring with bottom notch of bracket.
Dimple signifies center.
Step 2: Tape mounting ring into place.
Step 3: With a fine tip permanent marker, mark posistion for holes to be drilled.
Step 4: Remove mounting ring to reveal ink marks.
Step 5: Line up center drill bit with pen mark.
Step 6: With a center drill bit, make dimple.
Step 7: Now we are ready to drill.
Step 8: Drill holes.
Step 9: Debur drilled holes.
Step 11: Bolt, flat washer, internal tooth washer, flat washer, nut.
Step 12: Send bolt and flat washer through ring and housing to internal tooth
washer, flat washer and nut on other side.
Step 13: Insert clock ring. Line up center dimples.
Step 14: Insert headlamp lining up notches on back of lamp to those in clock ring.
Step 15: Line up notch on retaining ring with bottom notch of other two rings.
Step 16: Bolt, internal tooth washer, flat washer, spacer.
Step 17: Send bolt, internal tooth washer, flat washer through retaining ring,
spacer and into threaded mounting ring.
Step 18: Tighten down.
Step 19: Line up bottom notch of beauty ring