Install 1-7048-35

Step 1: Line up rings, this notch can help you center it to screw

Step 2: Clips and springs should be in place

Step 3: Tip of the clip is inserted into these existing holes inside housing

Step 4: Line up bottom bracket with screw hole at 6 o'clock on housing

Step 5: Press clips thru housing holes

Step 6: Line up threaded hole and install screw just a few threads

Step 7: Clips should be seated as shown

Step 8: Connect lamp to lamp connector (pigtail)

Step 9: Install lamp by placing notches into tabs.

Step 10:

Step 11: Properly installed lamp

Step 12: Install beauty ring

Step 13:

Step 14: Notice opening on finishing ring

Step 15: Finishing ring fits along housing

Step 16:

Step 17: Push lamp down as you install finishing ring

Step 18: Continue pushing lamp into housing as you install finishing ring

Step 19:

Step 20: Finish installing screw

Step 21: Make sure finishing ring is properly seated all the way around

And that's it!