FLHX Street Glide ('14-on) 8-9031-H911 Install (Two Bulbs)


Step 1: Remove trim ring (one Phillips screw at bottom) and mounting ring
(four T-25 torx screws)

Step 2: Remove headlight connector from it's bracket and relocate to the right inside
of fairing

Step 3: Rotate and remove H11 Bulb

Step 4: Rotate and remove H9 Bulb

Step 5: Line up tabs on Headwinds H911 bulb with notches on reflector

Step 6: Insert and rotate Headwinds H911 LED bulb

Step 7: Line up tabs on second Headwinds H911 with notches on reflector, Insert
and rotate bulb and connect the LED bulb connector to the stock wiring harness

Step 8: Three screws on mounting ring can be adjusted moving lamp back and forth

Step 9: Re-install mounting ring with 4 screws and trim ring with one screw

Step 10: Aim Lo-Beam

Step 11: Check Hi-Beam