Home Page | Contact Us | About Us | Your Account | Basket Contents | Terms & Conditions | CHECKOUT | FREE SHIPPING On orders over $400.00
Installing Mounting Ring 8-9797 (Metric) Step 1: Remove stock headlight assembly from stock headlight housing. Rear view of assembly. Step 2: Remove adjustment screws Step 3: Remove trim ring from headlamp adjustment bracket. Step 4: Both nut and bolt will come off. Step 5: Trim ring removed. Step 6: Remove adjustment bracket from lamp. Step 7: Adjustment bracket removed. Step 8: New after-market lamp. Step 9: Adjustment bracket mounting tabs are at 12 and 6 o'clock on the headlamp. Step 10: Slide the headlamp into the bracket starting at the bottom and then the top. Step 11: Using your thumb, slightly pry mounting tab outward so the headlamp seats flush into the adapter bracket. Headlamp flush in adapter bracket (back). Headlamp flush in adapter bracket (front). Step 12: Make sure mounting tabs line up at top and bottom. Step 13: Fold over retention tabs (x's 3). Step 14: Make sure headlamp is secure in adapter bracket. Step 15: Attach the headlamp with adapter bracket to the adjuster bracket to the top mount. Step 16: Attach the left side adjuster screw with spring. Then the bottom mount. Step 17: Insert the headlamp with adjuster bracket into the trim ring. Attach left side mount with screw. Step 18: Reinstall the right side adjuster screw with spring. Then the right side mount. Step 19: Adjust the trim ring accordingly until it sits even with the lamp. You are finished!