FREE SHIPPING On orders over $400.00
Click on pictures or underlined words
ATTENTION BIG DOG OWNERS
ISSUE: Big Dog Motorcycles with an Electronic Harness Control (EHC) require that the high & low beam headlights
draw 5 & 4 amps respectively, if they do not the lights will not function properly (they will flash or pulsate) or may not
work at all. If hooking up a relay, the solenoid will not draw enough amps to activate the EHC.
SOLUTION: Install a relay and add an in-line fuse to the lights in the eyes, and install a 20W (.139 OHM) resistor
in-line between the relay & Hi/Lo switch.