LED H4 Bulb Install

Step 1: Typical lamp with H4 bulb. Your bulb retainer may be different.

Step 2: Remove retainer wire. Pinch & lift spring wire to release bulb.

Step 3: Flip spring wire over & remove bulb.

Step 4: LED Bulb comes with separate bulb base as shown.

Step 5: Install bulb base by lining up tabs with reflector notches.

Step 6: Reinstall the retaining wire.

Step 7: Insert bulb into base opening tab up & shield down as shown.

Step 8: Line up bulb tabs (x2) with socket slots (x2).

Step 9: Completely insert bulb.

Step 10: Gently turn bulb clockwise until it locks into place.

Step 11: Connect bulb plug to standard connector.

Step 12: Aim The Headlight Click here